How To Install Wheel Lights

How to Install LED Lights on Bike Wheels

Compatibility Check:

• Ensure your wheel rims are compatible. Avoid curved rims and check the width [00:43].

Preparation:

• Clean the rim with soap and water, then use an alcohol prep pad [01:33].
• Plug in the lights to test them [02:09].

Installation:

1. Line up the lights near the valve stem [02:20].
2. Cut the light strip to fit, being careful to cut on the line between the 12 volts and the bead [03:13].
3. Use a sharp tool to cut a 45-degree angle in the silicone protective layer [03:37].
4. Press down firmly to ensure the adhesive sticks well [04:08].
5. Use zip ties to secure the cable and control unit [04:48].
6. Attach the battery pack to the hub using zip ties, ensuring correct cable direction [05:20].
7. Plug in the battery pack [06:23].
8. Optionally, add a second LED kit and zip tie the cables together [06:33].

Testing:

• Test the different light modes [07:14].